If you are not happy with where your motorized drapery stops when closed or opened you can easily change those limits.

Video procedure

Step by step procedure

First, send the drapery to the limit you want to adjust.

Once the drapery reaches the current limit, press and hold the UP and DOWN buttons simultaneously until the drapery jogs. A jog is a brief movement of the motorized drapery.

Your motorized drapery will remain in programming mode for two minutes.

Move your motorized drapery to the new desired position using the UP and DOWN buttons, then press the MY button to confirm the new limit.

Repeat for this same process for the opposite limit as well.

Remember that you will only be able to move the drapery as far as the stack back allows. Once the drapery reaches the current limit, press and hold the UP and DOWN buttons simultaneously until the drapery jogs.

Move your drapery to the new desired position and press the MY button to confirm the new limit.

Your new limits are now set!