Video procedure:

Step by step procedure:

This procedure is valid for motor:

• LT 50/60
• MS 100/200
• RDO 50/60

Identify the end-limits buttons

1. Remove the cover to access the setting buttons on the drive head

The buttons have got two positions:

• Pressed: the end limit is unlocked

• Released: The end limit is locked

2. Press the two setting buttons to unlock the end-limits and place the drive at mid-height position (approximatively)

3. Release the yellow end-limit button on the drive

4. Press up. If the drive moves up stop it immediately!

TWO SCNEARIO:

Case 1: The drive moved up

• The yellow button set the lower end-limit
• The white button set the upper end-limit

Case 2: The drive did not move

• The yellow button set the upper end-limit
• The white button set the lower end-limit

Set the end-limits of the roller shutter

1. Press the two setting buttons to unlock the end-limits

WARNING: The end limits of the drive are unlocked and will not stop the motorised product. You have to stop it manually.

2. Press down to reach the desired lower end limit

Press up or down then stop to adjust the position and completely close the shutter.

3. Released the lower end-limit button and let the other button pressed

Case 1: The yellow button set the lower end-limit

Case 2: The white button set the lower end-limit

4. Press up to reach the desired upper end limit

Press up or down then stop to adjust the position and completely open the shutter.

5. Released the lower end-limit button and let the other button pressed

Case 1: The white button set the upper end-limit

Case 2: The yellow button set the upper end-limit

The roller shutter is set and ready to be used!