Why the TaHoma switch is not flashing blue at the begining of the installation process?
You want to set up and configure a Somfy TaHoma switch, but it is not flashing blue.
First press the central button located on the top of your TaHoma until the LED blinks blue.
If the TaHoma still not flashing blue, follow this steps:
- Disconnect the power supply.
- With the help of a pin, press and hold the reset button located deep in hole, near the PROG button under the gateway. You should feel the button click with your pin, otherwise the pin is not long enough.
- While maintaining pressure on this reset button, reconnect the TaHoma.
- Still hold the button 15 seconds, then release.
If despite your manipulations the situation remains unchanged, we invite you to contact your after-sales service.